Merida Big Nine XT2 - DARK SILVER(BLACK)
In stock
Merida
You are looking for a Shimano XT equipped hardtail, but you prefer a double chainring setup. Look no further; the BIG.NINE XT2 aluminium 29er is your perfect off-road companion.
Features
- Double butted smooth welded aluminium frame with 29er wheels
- Less aggressive and more upright geometry for maximum control and comfort
- Shimano XT/SLX 12-speed drivetrain with double chainring setup
- Internal cable routing
- Manitou Markhor 100 mm travel suspension fork with remote lockout
Specifications
- Intended Use- Mountain
- Wheel Size- 29"
- Braking System- Hydraulic Disc
- Frame Material- Aluminium
- Fork Material- Aluminium
Components
- Frame- BIG.NINE TFS III material: aluminum 29x2.25" max. wheelsize 135x9mm axle standard BSA bottom bracket standard Smooth welding
- Fork- Manitou Markhor Comp Air 100mm suspension travel Tapered Remote lockout 51mm fork offset
- Bottom Bracket- Shimano BB52 BSA
- Chain- KMC X12
- Crank- Shimano XT 36-26 teeth 170 mm-S, 175 mm-M up
- Shift Levers- Shimano XT
- Cassette- Shimano M7100 10-45 teeth 12 speed
- Front Derailleur- Shimano SLX
- Rear Derailleur- Shimano XT M8120 Shadow+ SGS
- Grips/Bartape- MERIDA COMP EC
- Handlebar- MERIDA EXPERT CC material: aluminium 760mm width flat
- Stem- MERIDA EXPERT CC material: aluminium 31.8mm diameter 6° stem angle S-70 mm, M-80 mm, L-90 mm, XL-100 mm, XXL-110 mm
- Saddle- MERIDA COMP SL V-mount incl. MERIDA minitool
- Seatpost- MERIDA COMP CC material: aluminium 30.9mm diameter 0mm setback
- Front Brake- Shimano M6100 2 piston
- Rear Brake- Shimano M6100 2 piston
- Tire- Maxxis Ikon 29x2.2" wire
Merida Big Nine XT2 (Dark Silver/Black)
SIZE CHART
| Height (CM) | 156 | 157 | 160 | 163 | 165 | 167 | 168 | 170 | 172 | 173 | 177 | 179 | 180 | 183 | 184 | 185 | 187 | 190 | 192 | 195 | 196 | 198 | 200 |
| FRAME SIZE | XS | XS | XS | XS | |||||||||||||||||||
| S | S | S | S | S | S | S | S | S | |||||||||||||||
| M | M | M | M | M | M | M | M | M | |||||||||||||||
| L | L | L | L | L | L | L | L | ||||||||||||||||
| XL | XL | XL | XL | XL | |||||||||||||||||||
| XXL | XXL | XXL | XXL | XXL |
HOW TO MEASURE?
HOW TO CHOOSE RIGHT BIKE SIZE
The right sized bike is THE most important thing to maximize your performance, enjoyment, and to also ensure you stay injury free. Generally, two measurement required to choose the correct frame size.
- Your Height
- Inseam Length
To measure your height, stand against a wall and mark the wall with a pencil so it’s level with the top of your head. Then measure from the ground up to the mark. Having someone assist you makes this a lot easier and a lot more accurate. For your inseam/inner leg measurement, stand against a wall and using a book, hold it in between your legs into your groin and make sure it’s flat against the wall. Measure the height from the book to the floor. These 2 measurements are typically sufficient to match brand specific size charts to help you arrive at a specific frame size, recommended by the brand.
In some rare scenarios – if your height and inseam leg measurements put you in-between two sizes, your upper body length would be the deciding factor in selecting the best size bike for you. Your upper body dimensions determine the ‘Reach’ and this affects how ‘stretched-out’ you will be along the top tube of your bike as you ride it. To work out if you have a long or short reach, you need to determine your ‘APE INDEX‘ which is nothing but arm span minus height.
A positive Ape Index (arm span > height), then we suggest you go for the larger bike sizes.
A negative Ape Index (height > arm span), then you’re probably more comfortable on the smaller size
psst – Arm Span is the distance between the tips of middle fingers of both arms outstretched at right angles to the body, measured across your back. Much easier if you have a friend do this for you.